Renard Plus TR-8 Flex Controller Board
  • Renard Plus TR-8 Flex Controller Board

Renard Plus TR-8 Flex Controller Board

$8.00

Renard Plus TR-8 Flex- 8 channel high current renard controller bare board.

Quantity

The Renard Plus TR-8 flex controller board is a full power (24 amp) controller designed using the Renard protocol. Renard is the name of a computer-controlled, PIC-based dimmer scheme. This design uses a PIC micro-controller capable of outputting 16 channels and can be daisy-chained, use one-direction RS485 for input. This controller requires a personal computer to send it real-time sequences of dimmer commands to the controller.

   

There are several daughter boards that cne be used with the TR-8 Flex controller:

    

To add an additional 8 channels use: SSR Snap in board plus either 2 of the SSRHc boards or one of the SSR8 board.

   

To add 8 additional LSD channels use: LSD 8 channel Snapin board

   

For Documentation and Bill Of material (BOM) lists please visit the Renard Plus Website.

7 Items

Download

PIC Programming Guide

Download (3.27M)

RP TR-8/Flex User Guide

Download (2.07M)

RP TR-8 Flex LSD/DMX Firmware

Renard Plus TR-8 Flex LSD/DMX Firmware

Download (63.93k)

RP TR-8 Flex SSR/DMX Firmware

Renard Plus TR-8 Flex SSR/DMX Firmware

Download (63.71k)

RP TR-8 Flex Renard/DMX Firmware

Renard Plus TR-8 Flex Renard/DMX firmware

Download (63.53k)

Renard Start Address Guide

Download (159.91k)

You might also like